Battery-powered lifting magnet Walmag BMP
Manufacturer:
Battery-operated BMP lifting magnets are designed especially for lifting and handling materials with a round cross-section. Also suitable for handling flat materials as well as other various profiled sections, angle bars, etc. Integrated 12V battery provides 8 hours of operation at 50% duty cycle. The magnetic field is also strong enough for loads with variable, uneven surfaces and air gaps.
The emphasis is on safety: The battery-powered lifting magnet will never switch off during manipulation spontaneously. Simultaneous push of 2 buttons is required to release the load. It cannot be switched on if the battery is not sufficiently charged. Battery status below the safe limit is indicated by visual and audible alarms.
Important parameters:
Application: Lifting
Technology: Electromagnet (battery-powered)
Battery: 12 V
Battery life: 8 hours at 50 % cycle
Nominal lifting capacity for flat material: up to 3600 kg
Nominal lifting capacity for round material: up to 2260 kg
Temperature: max. 50 °C
Safety factor: 2:1
Use:
Handling loads with reduced surface quality
Handling tubes, bars, I-, H-, T-, and Z-shaped profiled sections and more It will also manage flat material, angle sections, sheet piles, etc.
Advantages:
The shape of the poles makes it possible to handle round and other materials
It can also be controlled using the IR remote control from up to 10 metres away
Display with battery level LED indicator
| Designation | Lifting capacity for flat material kg |
Lifting capacity for round material kg |
Min/max diameter mm |
W x L mm |
H mm |
Weight kg |
Built in battery |
| BMP1800 | 1800 | 1130 | 40/440 | 242 x 470 | 659 | 167 | 12V/75Ah |
| BMP3600 | 3600 | 2260 | 45/500 | 262 x 760 | 713 | 420 | 12V/75Ah |