Electropermanent lifting magnet Walmag NEO EP
Manufacturer:
Neo EP electropermanent lifting magnets are a professional solution to frequent handling. It does not require much effort to install. You can easily connect it to the ordinary power supply using the supplied power cable. After electric activation, the load is held by permanent lifting magnets, without the need of subsequent power supply. Electric control with buttons allows the operator to activate the device without physical effort. Due to the optional remote control, this is also possible in locations with poor accessibility.
Neo EP can be controlled from the ground or from the crane cabin. The magnet strength control can be integrated as an optional function. This is convenient for lifting individual sheet metals.
Important parameters:
Application: Lifting
Technology: Electropermanent
Nominal lifting capacity for flat material: up to 4000 kg
Temperature: max. 80 °C
Duty cycle: 100 %
Safety factor: 3:1
Typical use:
NEOSQ300 - handling smaller parts from mass production, blanks, forgings, castings
NEOSQ600 - handling longer parts and profiled sections (steel strips, rails, tubes, beams, and rods) for subsequent material cutting by saw, e.g. in metallurgical warehouses.
NEOSQ1000 - handling thicker sheets, burn parts, tools, and cuts. Suitable for large tables, where it is difficult to use e.g. Neo series permanent magnets.
NEOSQ4000 - handling large parts during plasma cutting. The control panel is shifted to the edge for comfortable removal of the magnet from the machine table.
Advantages:
Control of the magnet without any physical exertion. Thanks to the optional remote control, it is also possible to control it, e.g. from a crane cabin
High-quality, stainless steel recessed buttons
Quick activation of the magnet with an electrical impulse in 0.8 seconds
Magnetic module in a monoblock design
Easy connection to the electrical power supply
Electrical connection is only necessary for switching the magnet ON and OFF Suitable for continuous operation; it does not need a backup battery
Standard Input voltage 400V, 230V version on request (300 and 600 kg capacities)
Stable housing with a forged lifting eye
Optional integration into automated operation
| Designation | W mm |
L mm |
H mm |
Number of poles |
Pole structure |
Clamping surface mm |
Weight kg |
| NEOSQ300 | 164 | 164 | 420 | 4 | 50 x 50 | 116 x 116 | 23 |
| NEOSQ600 | 95 | 420 | 450 | 6 | 50 x 50 | 52 x 372 | 31 |
| NEOSQ1000 | 228 | 228 | 295 | 4 | 80 x 80 | 172 x 172 | 39 |
| NEOSQ4000 | 228 | 783 | 295 | 16 | 80 x 80 | 172 x 724 | 132 |