ASPA Adaptor
Manufacturer:
Thread adapters should only be used as a reducer for already existing threads to allow the attachment of high tensile RUD lifting points. The thread adapters ae marked with the inside and outside thread diameters. Attention: Never use DIN 580 or standard type eyebolts in combination with RUD thread adapters! The WLL of the adapter is matched to the WLL of the RUD lifting point. The thread adapter provides spanner flats for a wrench, a goove for a hook spanner and a hole for an assembly pin.
| Designation | Weight kg |
T mm |
A mm |
B mm |
C mm |
D mm |
F mm |
G mm |
M mm |
Order no. |
| ASPA M16/M8 | 0.07 | 8 | 35 | 30 | 20 | M8 | 5 | 6 | M16 | 7994782 |
| ASPA M20/M10 | 0.11 | 9 | 38 | 32 | 24 | M10 | 5 | 6 | M20 | 7995682 |
| ASPA M24/M12 | 0.15 | 9 | 42 | 36 | 28 | M12 | 5 | 6 | M24 | 7993856 |
| ASPA M30/M16 | 0.27 | 10 | 51 | 46 | 36 | M16 | 6 | 7 | M30 | 7993857 |
| ASPA M36/M20 | 0.48 | 12 | 65 | 55 | 43 | M20 | 6 | 8 | M36 | 7993858 |
| ASPA M42/M24 | 0.80 | 16 | 82 | 70 | 50 | M24 | 8 | 10 | M42 | 7995674 |
| ASPA M48/M24 | 1.08 | 16 | 82 | 70 | 58 | M24 | 8 | 10 | M48 | 7995675 |
| ASPA M56/M30 | 1.75 | 16 | 100 | 90 | 67 | M30 | 8 | 10 | M56 | 7995676 |
| ASPA M64/M36 | 2.33 | 16 | 110 | 95 | 77 | M36 | 8 | 10 | M64 | 7995677 |
| ASPA M72/M42 | 2.79 | 16 | 110 | 95 | 86 | M42 | 8 | 10 | M72 | 7904234 |
| ASPA M80/M48 | 3.43 | 16 | 110 | 95 | 96 | M48 | 8 | 10 | M80 | 7900469 |
| ASPA M42*3/M24 | 0.80 | 16 | 82 | 70 | 50 | M24 | 8 | 10 | M42*3 | 7904966 |
| ASPA M48*3/M24 | 0.89 | 16 | 82 | 70 | 40 | M24 | 8 | 10 | M48*3 | 7903250 |